Changing behold volume

The best way I have figured out how to do it is to go into the settings menu and change the amount of shift from 2 to either 3 or 4. I set mine to 3 because it still sounds reasonable. I got the below code on this site a while back but I thought that I should change the individual volume levels but this is way easier and works WAAAAY!!!! better. Good luck.

Admin Password:
*Internals* Master Key: *#9072641*#
*Pre-Configuration* Operator Code: *#73561*#

Behold Menus:
Admin Menu Code: *#6984125*#
TouchScreen Setting: *#78#
Light Senor /PS Test: *#0523#
Sound Settings: *#0002*28346#

EAR MP3 settings:
0[2]rx:-46.0dB
1[4]rx:-39.0dB
2[6]rx:-32.5dB
3[8]rx:-26.5dB
4[10]rx:-20.5dB
5[12]rx:-14.5dB
6[14]rx:-8.5dB


SPK MP3 settings:
0[2]rx:-45.0dB
1[4]rx:-35.0dB
2[6]rx:-27.0dB
3[8]rx:-21.0dB
4[10]rx:-17.0dB
5[12]rx:-13.0dB
6[14]rx:-9.0dB


Misc Settings:
Shows the IMEI: *#06#
Shows Unique Number: *#03#
Vibrator Test: *#0842#
Buzzer Test: *#0289#
Battery Statue: *#0228#
RTC Display: *#0782#
LCD Contrast: *#0523#
Blank white screen: *#09#
_______________________________________________


Not sure if you guys knew about this just little something i ran into. Thought you might find it interesting.

- Type *#0002*28346#.
- It will bring Blank screen saying "Data loading is completed".
- Press Behold Back button.

- [1] Load Params
- [2] Dump Params
- [3] Call config

- Press Behold Back button again.

- [1] RVC Config
- [2] EAR Config
- [3] SPK Config
- [4] BTH Config
- [5] Common Config
- [6] Rebuild
- [7] LM49350 Config
 
- Press Behold Back button again.

- [1] Debug Screen
- [2] Version Information
- [3] RF Test
- [4] UMTS rf nv
- [5] Read gsm rf nv
- [6] Write gsm rf nv
- [7] Base Band
- [8] Audio
- [9] Common

Increase Speaker Volume:
- Press Behold Back button
- Press 3 (SPK Config Menu).
- Press 4 (AV-QTune (MP3)).
- Press 1 (SPK MP3 Vol[]).
- Now Increase Volume to -9.0dB or Decrease to -45.0dB

Was Looking Around this is same as other Menu (*#9684125*# -> *# 9072641*#) it's one of the sub-menu

I have had my behold for about six months now and i have been on here a few times to see what i can learn about tweeking my phone, so to say I'm not very good at this stuff. I tried to follow your instructions on how to turn up the speaker volume and i have set it to high and am afraid  of blowing the speaker. How, step by step do i get back in and change it a little lower?

I would really like to keep my speaker volume louder than factory, but it's to loud right now and i tried following the steps OReilly posted, but im not very computer savy.

thanks for the info, but my brother-in-law who is a computer wiz fixed it for me, he set it back to default. i did copy everything important to my memory card and did the master reset, but it didn't do anything but change the font back factory and the ring tone back to factory. thanks again for the info though.

how come my even number volumes are messed up but my odds are working just right

I want to raise the ear volume for calls, but there are so many settings that I'm afraid to mess with, can someone tell me which one i need to change?

i messed mine up and whenever i listen to music its way too loud how do i change it back to normal like when you first get it,i cant figure it out!