i have an invisible shield and it took about 45 min to install on each of my beholds. the thing with the invisible shield is that you must have a very clean environment to install it. you also have to make sure your device is free of all lint dust and finger prints. and you must take your time to install it, you cannot install it in 10 min. you also need to not be afraid to use the spray that comes with it. if you don't use enough then you will not get a good install. i found that the more spray i used the easier it was to install the shield on the back and the front. but the more spray i used on the side pieces it was harder to get them to stick, but eventually they stuck and it looks great. can't even tell i have the shield on the phones
Every bit of that is true. I made sure to clean both my hands and my Behold very well before installing the invisibleSHIELD and used plenty of the spray, but a small piece of dust managed to find its way under the shield on the screen and I didn't notice it until after the curing period >_<
dinosaur: Just to double check, did you use the mini squeegee that came with the kit? That should have gotten rid of all the bubbles you came across. There's a
mirrored screen protector that you can get off of ebay for really cheap. But if you're not into the whole reflective deal there's another protector similar to invisibleSHIELD that others have had a good experience with though the name escapes me. Let me do a search on the forum to find the name of it @_@ BRB!
EDIT: GHOST ARMOR!....it was
Ghost Armor =)
